Contact
Quarry Bank
Chorley Road
Walton le Dale
Preston
Lancashire
PR5 4JN
Tel: 01772 883090
Fax: 01772 885464
GENERAL FIRE SHUTTER SPECIFICATION
- Barrel: Constructed from mild steel tube with helically wound counter balance springs mounted on mild steel bright shaft, with mild steel bearing blocks at each end incorporating high speed bearings. Tube and shaft size are dependent upon shutter size.
- Curtain: Constructed from 75mm wide curved interlocking galvanised steel lath with steel endlocks and galvanised T section bottom rail.
- Operation: Operation is by. one of the following... Spring Assisted, Hand-Chain, or Electric Motor. Connected to a Fusible Link.
- Electrical Operation: By means of /2 - 2 H.P geared motor complete with rotary limits and emergency hand mechanism. 3 push button control as standard.
- Electrical Supply: 240 Volt I phase, or 415 Volt 3 phase (additional information available upon request).
- Side Guides: Constructed from 3mm x 63mm galvanised channel for both drop bar and curtain. Bolted to a continuous 75mm x 50mm mild steel angle.
- Coil Casing: To suit end plate dependent upon on size from galvanised 0.9mm sheet. Slotted for expansion to suit Ml0 fixings.
- Finish Options: As standard galvanised curtains, side guides and coil casing, with black painted angles and end plates. However to compliment the aesthetics of buildings, this product can be powder coated to any BS or Ral colour.
- Optional Extras: Electrical Auto-Reset, Wiring into fire alarm, Audio Visual Displays, Solenoid Release, Quartzoid Bulb, Controlled Descent Unit.







